Super Blaster Machine works on suction principle of lifting abrasive media to the blasting gun. High pressure compressed air when injected through venturi creates suction on the side of air injection. This suction pressure so created is used to lift abrasives which mix with the high velocity compressed air creating soft blasting. These super blaster machines are used for glass bead blasting, alumina blasting of soft metals like aluminum di-casting, carving on glasses, roughening of stones. Various standard and special size machines are available for selection.
Suction Blaster Operating Principal
Suction Blaster is the simplest and most effective way to remove corrosion and old paint. Suction Blaster is a clean, dust free sand blaster that leaves the surface cleaned and well prepared for painting, filling etc. When the cabinet and power module is correctly set-up, the cabinet is ready for operation by actuation of the foot pedal. After pressing the foot pedal air flows through the blast gun. Air moving through the gun draws media into the blast gun mixing chamber. The media mixes with the air and is propelled out the nozzle. After striking the object being blasted, the blast media, along with fines, dust, and byproducts generated by blasting, fall through the grate into the cabinet hopper. These particles are drawn into the reclaimer for separation. Dust and fines are first separated from the reusable blast media. Next the media is screened of oversize particles, and returned to the reclaimer hopper for reuse. Dust and fines are drawn from the reclaimer into the dust collector which traps the dust, discharging clean air. When the foot pedal is released the blasting stops.